I migliori 8 supporti per microfono Yeti blu da acquistare nel 2022 Recensione

L'aumento della potenza di calcolo ha portato nuove opportunità, sia personali che aziendali. Ma c'era una cosa importante che mancava. La possibilità di collegare un microfono direttamente a un laptop o computer senza utilizzare un'interfaccia. Tuttavia, la creazione del microfono USB ha risolto il problema.

Sono dispositivi plug-and-play e quindi molto facili da usare. Allo stesso modo, sono convenienti e aprono un mondo completamente nuovo per interviste, podcast, ecc. 

Progressi tecnologici

Non c'è dubbio che rappresentano un entusiasmante passo avanti per determinati ambienti. Ma non sono certo per tutti o per tutti gli usi. Tuttavia, hanno molto da offrire in alcune situazioni, specialmente per coloro che desiderano un'opzione plug-and-play.

Ma è giusto dire che non hanno fatto molta impressione nella fascia alta del mercato. È improbabile che li trovi negli studi di registrazione. La qualità ha qualcosa a che fare con questo, ovviamente. Il tempo ci dirà se le aziende produrranno microfoni USB per competere con i microfoni Neumann, Sennheiser o AKG per la voce.

Lo Yeti blu

Uno dei migliori microfoni USB disponibili è il Blue Yeti. Realizzati da Blue, sono una delle numerose opzioni USB prodotte dall'azienda. È anche uno dei più popolari. Per la registrazione di voci fuori campo, podcast e interviste, fa un ottimo lavoro.

Non ci sono lamentele sulla sua costruzione. È un microfono ben fatto e abbastanza robusto e stabile. È elegante e sembra buono. Tuttavia, se ha un punto debole, è lo stand.

Anche lo stand stesso è abbastanza stabile e, in alcuni casi, un vantaggio. Ma può avere un effetto negativo sulla registrazione. Con questo in mente, ho messo insieme questa recensione dei migliori supporti per microfono Blue Yeti attualmente sul mercato.

Una posizione alternativa?

Molte persone sembrano concordare sul fatto che sia meglio utilizzare un'asta microfonica alternativa rispetto a quella fornita. Vorrei fare questa osservazione, però.

La filettatura su The Blue Yeti per il montaggio è ⅝; pertanto, dovrai trovare un supporto con quel filo. In alternativa, un supporto dotato di un adattatore. Su queste basi, diamo un'occhiata ai migliori supporti per il tuo microfono Blue Yeti .

I migliori 8 migliori supporti per microfono Yeti blu per tutti i budget nel 2022 Recensioni

1. Braccio per microfono da studio RODE PSA 1 con supporto girevole – Il più resistente supporto per microfono Yeti blu
2. Supporto da braccio per microfono InnoGear – Sabbia per microfono Yeti blu più regolabile
3. Supporto per microfono con braccio DISINO Supporto per microfono a molla per impieghi gravosi:il miglior supporto per microfono Yeti blu per impieghi gravosi
4. Supporto microfono Iksee Studio Arm:il miglior supporto per microfono Yeti blu di base
5. Braccio di sospensione regolabile per microfono East Shining:il miglior supporto per microfono Yeti blu economico
6. Supporto per microfono con base corta Gator Frameworks – Supporto per microfono Yeti blu con il miglior rapporto qualità-prezzo
7. Heil Sound PL-2T Overhead Broadcast Boom - Supporto per microfono Yeti blu con il miglior bilanciamento
8. Blue Compass Premium Tube Boom Arm in stile Broadcast - Il miglior supporto per microfono Blue Yeti Boom Arm

1 RODE PSA 1 Braccio per microfono da studio con montaggio girevole - Supporto per microfono Yeti blu più resistente

Questo è un asta microfonica dell'azienda australiana Rode. Sono famosi per la produzione di microfoni e accessori di qualità. Ma altrettanto importante, realizzano prodotti robusti e robusti. Un fattore importante per un'asta microfonica. Il PSA1 è uno degli supporti per microfono più popolari per Blue Yeti utenti.

La struttura

È robusto e ben costruito con un design interamente in metallo. Il Blue Yeti pesa poco più di un chilo e questo supporto può sopportare fino a due chili e mezzo. Questo è più che sufficiente per il microfono, il filtro pop e un supporto antiurto.

È stato progettato per sopportare il peso del microfono più pesante. Viene fornito con un adattatore per convertire la dimensione del filo da ⅜ a ⅝ in modo che il raccordo sia compatibile. Questo lo rende uno degli supporti per microfono Blue Yeti più compatibili intorno.

Opzioni per il montaggio

Sono disponibili due opzioni per il montaggio, il morsetto da tavolo e l'installazione con inserto da tavolo. Il supporto da scrivania ti consentirà di collegarlo a desktop con uno spessore massimo di 55 mm. Tuttavia, l'inserto da scrivania offre qualcosa in più con uno spessore di 70 mm. Il supporto ha un design a doppio asse. Questo ha una parte girevole e rende facile fissare e posizionare il supporto in un posto conveniente.

Una buona portata

Ti consentirà un sacco di distanza alla sua portata. Fino a 33 pollici di altezza e 32 pollici in orizzontale. E rimarrà stabile con un microfono collegato a quegli estremi. È flessibile e ruoterà di 360 gradi. Gli avvolgicavo in velcro sono inclusi in modo da poter tenere il cavo del microfono al sicuro e fuori mano.

Cambi di posizione

Per modificare la posizione del braccio del braccio, è progettato con un meccanismo a molla per impieghi gravosi. Questo lo rende sicuro se cambi la posizione del braccio e rimarrà dove lo desideri. Non sarà influenzato dal peso del microfono.

Un buon supporto per microfono realizzato con buoni materiali e dovrebbe essere considerato uno dei migliori supporti per microfono Yeti blu.

Pro

• Ben fatto con buoni materiali.
• Buona portata e capacità di tenuta del peso.

Contro

• I cavi non hanno un canale per il fissaggio tramite fascette in velcro.

2 Supporto da braccio per microfono InnoGear – Sabbia per microfono Yeti blu più regolabile

InnoGear è un'azienda che vende un'ampia varietà di prodotti. Quindi, non puoi riferirti a loro come "Specialisti di aste microfoniche". I am not sure where this mic stand comes from or who designed and built it, from their website that seems to be a closely guarded secret. Having said that, it is a decent product and worth including.

Specially designed for Blue mics

This is a mic stand that will operate with many of the Blue USB range. Including the Snowball, the Yeti, and the Yeti Nano. It has a very stable build being an all-metal construction with steel tubed arms that are half an inch thick. That gives it a high load-bearing capacity of up to four and a half pounds.

There is a spring-balanced system built-in to give you plenty of secure movement for getting the right position. The cabling is hidden inside the arm and not exposed to view. It is supplied with an ⅝-inch thread connector for fitting the mic.

The Boom Arm

Good adjustments and reach. Horizontally it will give you up to thirty-eight inches. And vertically up to thirty-three and a half inches. The arms will support the weight of a Blue Yeti mic when at full reach. The boom arm is foldable for storage when not in use. There is a swivel action for adjusting the mic position. But there is no locking facility to keep it in a set position.

The Clamps

There are two mounting options. There is a typical desk clamp as well as a desk-insert attachment. Unclipping the mic from your desk is easy. It will attach to all desks that have a lip of over two inches. All this adds up to it being one of the best desk mounted BlueYeti microphone stands puoi comprare.

Pro

• Good quality all-metal build.
• Plenty of adjustment options at a cost-effective price.

Contro

• The swivel on the boom arm doesn’t lock.

3 DISINO Microphone Boom Arm Stand Heavy Duty Spring Mic Stand – Best Heavy Duty Blue Yeti Microphone Stand

This is a mic stand with a very heavy-duty look about it. I wouldn’t say it was the most visually appealing in some parts of its design, but it certainly does the job.

The Build

It is built with a steel tube frame with springs enclosed internally, which gives it a nice stylish look. It is strong and is not going to bend easily. Although you should ensure that all tightening controls are loosened before adjusting them.

Whilst the design of the boom arms is attractive; the clamp is a different thing altogether. It has a “vintage” woodworking G-clamp look, with what seems like an antiquated locking control.

The look seems to contradict the rather stylish steel tubes above it. Nevertheless, it does its job and offers a secure fit. The scissor arm design is fully adjustable and is sprayed using an electrostatic powder. This helps to make it anti-rust.

The Load

It can hold an impressive five pounds in weight. As a result, it’s one of the strongest Blue Yeti microphone stands  you can buy. It is fitted with a standard ⅝” thread, so there is no need for an adapter. Two scissor tube arms will extend to about twenty-eight inches. These can be folded away after use.

The Mount

It has clamps that will fit desks up to three inches in depth. The clamp itself has rubber fittings to ensure it doesn’t scratch the desk. The fitting allows the boom arm to be swiveled if necessary. The movement when clamped to the desk is smooth and stable.

A Budget option

Although the price point intimates that this is a budget range product, it is well-made and very secure. It may not have the length and reach of some stands, but it is one of the most secure Blue Yeti microphone stands  available.

Pro

• Well-made with good materials at an attractive price point.
• Safe and secure fit holding up to five pounds in weight.

Contro

• Some may need a longer reach.

4 Iksee Studio Arm Microphone Stand – Best Basic Blue Yeti Microphone Stand

This is a basic mic stand with a boom arm that will work with various microphone models. It is a little limited in that it will only operate with microphones that weigh up to 2.86 pounds. That will rule out some but includes the Blue Yeti. On the other hand, it does make this one of the best lightweight Blue Yeti microphone stands  available.

The Build

This stand has quite a sturdy all-metal build with its steel frame and iron base. It has a simple design with an internal spring. This allows some adjustments to the position of the mic, either up or down. It also has a 360-degree rotation. The arm is adjustable, so it can be folded away after use. It has a decent amount of reach while retaining its balance.

The Clamp

It can accommodate desktops that are up to 2.2 inches in depth. It is easy to adjust, but in my view, it doesn’t have the most secure fitting. The base plate of the clamp is quite small, and the knob for tightening the clamp is very basic.

It certainly appears that you might struggle to get a decent amount of pressure to hold a mic in some positions. It does take a reasonable weight of mic for this stand to function correctly. If the mic is very light, it does not apply enough weight for operation.

Some extras

You are supplied with a threaded screw for connecting the Blue Yeti and two foam covers for the mics.

Pro

• Basic boom arm stand with an all-metal build.
• Adjustable arm with 360-degree rotation.

Contro

• The clamp is a little vulnerable.

5 East Shining Adjustable Microphone Suspension Boom – Best Budget Blue Yeti Microphone Stand

If you are looking for a budget boom stand for your Blue Yeti, then this from East Shining might be an option.

The Build

This might not be the most aesthetically pleasing stand you will find, but it certainly does the job. It has dual suspension springs placed on each of the boom arms. These act to protect the mic from any unwanted movements or shaking but also increases the mic’s stability. It can support loads of up to four and a half pounds, so it will cope easily with the Blue Yeti.

It is made from Zinc Alloy and has a steel frame. Therefore, the build is strong and sturdy. It has been given an electrostatic powder-sprayed finish. This makes it anti-rust and will ensure it stays in decent condition. The boom arms are lightweight and fully adjustable and can be folded away easily after use.

The Clamp

It has a simple table mounting clamp with a screw tightener. It is easily fitted to a tabletop that has a depth of up to 2.15 inches. The clamp has a lining of a soft sponge material where it makes contact with the table. This is just to protect it from possible scratching. For added protection, there is also a rubber washer.

The Reach

With the two legs combined, it can reach up to twenty-seven and a half inches. It will therefore be able to fit easily into most environments and allow you to get mic angles correct. It comes with an instruction booklet, a plastic clip mic holder, and a ⅝” brass adapter to fit the thread of the Yeti.

A word of caution

You do need to be careful when opening the package this stand will be delivered in. The arms are held together with a simple band. When it is broken, the arms will spring out very forcibly. Best not to have your fingers inside the package when they do.

Pro

• Quite well-built beats basic stand with a decent reach.
• Cost-effective option.

Contro

• Some will need a stand with a bit more visual style.

6 Gator Frameworks Short Weighted Base Microphone Stand – Best Value for the Money Blue Yeti Microphone Stand

Now we move away from the boom arm design to a short stand with a compact base. This has a maximum height of just 23 inches, with a boom arm measuring 16 inches.

The Build

The base is quite compact at 4.5″ by 8″ and is made of heavy-duty steel. This will provide it with stability and good balance, so it will not get knocked over easily. Because of its low stature, it offers up the potential for other uses than as a desk mic stand. We will look at that later.

To prevent any rumbling noise that may occur between the base and the desk, it has a non-slip vibration gasket. Another plus point is the integrated cable management. Thus keeping unwanted cables out of the way.

Compact arm extension

For adjusting the position of the short arm, there are some soft rubber knobs. This makes them easier to grip and turn. That feature is not often included but is a nice touch. It takes just a quarter turn to be able to make those adjustments.

At its full extension, the stand is balanced and stable. And even though the Yeti weighs just over one pound, the stand will not topple over. Some people prefer single-section boom arms as they are easier to adjust. That certainly is the case with this stand.

What other uses?

I mentioned earlier that it might have other uses. It occurs to me that this is a good stand for placing on a desk and using your mic with your computer. But it also has other possibilities.

How about a mic in a home or small recording studio for placing in front of a kick drum? Or for micing up an amp? It is stable and holds a decent weight, and is a good height. As a result, this is one of the most versatile Blue Yeti microphone stands sul mercato.

Set at a very attractive price point, this has to be considered as one of the best Best Blue Yeti Microphone Stands.

Pro

• Well-built stable mic stand at a great price point.
• Offers a variety of uses.

Contro

• Some will prefer a full-size boom.

7 Heil Sound PL-2T Overhead Broadcast Boom – Best Balanced Blue Yeti Microphone Stand

Back to the boom design for this stand from Heil Sound. They are a company based in Illinois and were established in 1966 by Bob Heil. They also manufacture microphones and other accessories, so they ought to know what makes a good stand.

Well laid-out design

They have gone for a simple, uncluttered, but functional design. One of the features is that any cabling for the mic is hidden away. This puts it out of sight, of course, but also prevents any unfortunate accidents. They also make sure the springs are all hidden away internally. That is a feature that many prefer.

The Build

A strong all-metal build ensures it is stable, and the springs we have mentioned offer a perfect balance. The design features removable plates on the top and the back. This allows you to thread through the mic cable.

It can handle a weight load of up to three and a half pounds. Holding the Blue Yeti stable and in a fixed position is not then a problem. It will take a ⅝” thread.

The Clamp

There is a standard C-clamp mounting system, which may be considered its weak point. The clamp is not part of the stand itself and is included as an extra. And while the stand will hold the mic securely, it is only as secure as the connection to the table or surface.

The clamp will attach the stand to a table, but it does not feel as secure as some. Furthermore, the clamp has no padding, so it could scratch any surface to which it is attached. You can insert your own padding, but then the clamp tends to move around on the surface.

Not the cheapest around, and we remain unconvinced about the fitting. The boom arm is nicely designed and works well. The same cannot be said for the clamp.

Pro

• Nicely designed with good materials.
• Cabling and spring systems are hidden away out of sight.

Contro

• The clamping system is inefficient and can mark your desk.

8 Blue Compass Premium Tube-Style Broadcast Boom Arm – Best Blue Yeti Boom Arm Microphone Stand

Who should know what is required to make a great stand for the Yeti? You would think it would be the company that made it. This is Blue’s first attempt at a mic stand.

The Build

It features a strong and stable tube-style design made from aluminum. This allows the springs and the cabling to be kept safely out of the way and out of sight. Cable management is important with mics that are used in enclosed spaces. It is easy to trip over a cable and send the mic crashing to the floor.

Needless to say, it is designed to hold the weight of the Yeti. It will hold any mic up to 2.4 pounds in weight.

Further design features

It allows you to complete a 360-degree rotation and a fully adjustable boom. You can therefore get the positioning exactly how you want it.

The friction hinges tighten by hand and give you a quiet and smooth operation. It is compatible with all the standard shock mount fittings.

Clamping

They have used a C-clamp system. Once again, if there is a weak point, it is the clamping system. It is a little bit insecure and could damage the surface you attach it to.

This stand comes with a twenty-foot XLR cable and a pop filter. Both are more than useful additions. Furthermore, it is one of the most affordable Blue Yeti microphone stands sul mercato.

Pro

• Good build quality with plenty of adjustments and 360-degree rotation.
• Cabling and Springs are hidden in the arms.

Contro

• Clamping is not as secure as it might be.

Best Blue Yeti Microphone Stands Buying Guide

Although often overlooked, the stand is an important piece of equipment for a microphone. An inefficient stand can have several effects that are not what you need when trying to get a decent recording.

Everyone’s requirements will differ slightly. So, the first thing you need to do is decide what sort of stand you need. There are a couple of options.

Stability

The stand must be stable to be able to hold the mic. That means not only supporting its weight but also having good adjustments. You will need to be able to get the mic in exactly the right place.

What sort of stand?

Do you want a boom arm stand that will give you plenty of room? Or do you prefer a desk-mounted stand? The boom will give you the reach and the room, but it can have its stability problems. A desktop mic might incur the same problems that the Yeti has with its built-in stand.

Before you buy

After deciding, but before you buy, you need to make sure there’s enough of an overhang from the edge of the desk. If there is none, most boom arm mics cannot be attached.

Budget

None of the stands we have looked at are particularly expensive. You will be able to get a good stand for a reasonable investment.

Looking for a Great Microphone or Mic Accessories?

Possiamo aiutarti con quello. Check out our in-depth reviews of the Best Microphone Stands, the Best Live Vocal Mics, the Best Interview Microphones, the Best Computer Microphones, the Best Cheap Microphone Under $50, the Best Microphones For YouTube, the Best USB Microphones you can buy in 2022.

And if you are after more awesome Blue microphone products, have a look at our comprehensive Blue Snowball USB Microphone Review, our Blue Yeti X Review, our Blue Snowball iCE Review, our Blue Yeti USB Mic Review, and our Blue Baby Bottle Review for more amazing items currently on the market.

What are the Best Blue Yeti Microphone Stands?

Not being a great fan of boom arm stands, I would go for a stable short weighted base stand. I would choose the…

Gator Frameworks Short Weighted Base Microphone Stand 

Well-made, safe and secure, it is solid enough to do what I need. But it also has plenty of potential for use in other recording applications. My choice for the Best Blue Yeti Microphone Stand.

Alla prossima volta, fatti sentire.