>> Elettronica Tecnologia >  >> Home Audio >> Altoparlanti e Subwoofer

Come collegare la soundbar Samsung al subwoofer senza telecomando

Alcune soundbar hanno i propri subwoofer mentre altre no. Per coloro che lo hanno, l'accoppiamento di solito non ha bisogno di cavi di collegamento poiché la comunicazione è wireless. Tuttavia, normalmente è necessario un telecomando per collegarli. E se non hai il telecomando? In questo articolo ti mostreremo come collegare una soundbar Samsung a un subwoofer senza telecomando.

Puoi collegare una soundbar Samsung a un subwoofer senza telecomando tramite connessione manuale o automatica. Con una connessione automatica, basta accendere entrambi i dispositivi e se il Bluetooth è attivo, si collegheranno. Con una connessione manuale, utilizzi il pulsante ID SET sul retro del subwoofer.

Le soundbar Samsung sono tra i sistemi soundbar più eccezionali. Questo perché alcuni sono dotati di subwoofer e telecomando. Tuttavia, non tutti lo fanno e, in alcuni casi, potrebbe essere necessario collegare la soundbar a un subwoofer più vecchio, ad esempio.

Come faccio ad accoppiare il mio subwoofer Samsung senza il telecomando?

La configurazione del tuo sistema home theater dovrebbe essere una delle più semplici dopo aver acquisito i dispositivi giusti.

Inoltre, la soundbar e il subwoofer Samsung dovrebbero essere in grado di accoppiarsi automaticamente quando sono accesi. Questo rende più facile connettersi e godersi il tuo intrattenimento.

Il subwoofer si accende automaticamente quando il codice di alimentazione viene collegato all'alimentazione e configurato per l'accoppiamento con la soundbar Samsung inclusa. Vediamo come realizzare sia la connessione manuale che quella automatica.

Connessione automatica

Alcuni subwoofer possono connettersi automaticamente, soprattutto se il Bluetooth del subwoofer e della soundbar è già attivo. Si accoppieranno automaticamente. Assicurati di disattivare il Bluetooth su altri dispositivi nelle vicinanze.

Collegare i cavi di alimentazione del subwoofer e della soundbar alla presa a muro. Accendi la soundbar e consenti al subwoofer di connettersi automaticamente.

Dovresti essere in grado di controllare quando il subwoofer è completamente collegato. Ciò dovrebbe accadere quando l'indicatore LED blu sul sub smette di lampeggiare e invece si illumina continuamente. Se ciò non accade, significa che la connessione non è riuscita e dovrai risolvere i problemi riavviando la soundbar.

Come puoi notare, questo processo non prevede affatto un telecomando! Tuttavia, prima di effettuare la connessione, assicurati sempre che:

Collegamento manuale

A volte, la connessione automatica potrebbe non riuscire a causa di ragioni sconosciute, è qui che entra in gioco la connessione manuale.

Di seguito sono riportati i passaggi da seguire nel caso in cui si decidesse di risolverlo manualmente. Assicurati che la soundbar sia stata ripristinata alle impostazioni di fabbrica o che il subwoofer o la soundbar siano stati sostituiti o riparati.

Segui i passaggi seguenti per ottenere questa connessione manualmente:

Passaggio 1 :collegare il cavo di alimentazione della soundbar al retro del dispositivo, quindi alla presa a muro. Ripetere la stessa procedura con il subwoofer. Assicurati che la connessione sia sicura e protetta.

Passaggio 2 :Dietro il subwoofer, individuare il pulsante ID SET e premerlo verso il basso utilizzando un oggetto appuntito, perché il pulsante è troppo piccolo. Continua a tenere l'oggetto finché STANDBY non si spegne e il LED blu inizia a lampeggiare.

Passaggio 3 :Continua a tenere premuto il pulsante ID SET finché non appare sul display della soundbar.

Passaggio 4 :Mentre il LED blu del subwoofer continua a lampeggiare, accendere la soundbar e rilasciare il pulsante. L'unità principale e il subwoofer dovrebbero essere collegati ora e il LED blu dovrebbe smettere di lampeggiare ed essere acceso fisso. Se continua a lampeggiare, significa che la connessione non è riuscita e puoi risolvere i problemi spegnendo la soundbar e riavviando il processo.

Puoi usare un subwoofer Samsung senza la soundbar?

I subwoofer sono dispositivi audio indipendenti che funzionano per produrre suoni a bassa frequenza come sub-bassi e bassi. Pertanto, non dipendono dalle soundbar per riprodurre il suono. Il tuo subwoofer Samsung potrà quindi funzionare senza soundbar.

Come sincronizzare il subwoofer Samsung con la soundbar senza telecomando

Come già accennato, questo processo può essere complicato poiché la maggior parte delle soundbar si collega a subwoofer nativi accoppiati dal produttore. Tuttavia, molti produttori ti danno la possibilità di aggiornare la tua soundbar con più subwoofer con i prodotti consigliati.

Ad esempio, se acquisti una soundbar Samsung, dovresti acquistare un subwoofer compatibile Samsung per sincronizzarli correttamente. Molte soundbar sono attualmente confezionate con un subwoofer o altoparlanti aggiuntivi per creare un'esperienza audio surround migliore.

A parte i metodi convenzionali di collegamento di soundbar e subwoofer accoppiati dal produttore, è un metodo jerry che puoi utilizzare senza problemi per sincronizzare un subwoofer con una soundbar. For this method, you need a receiver and a stereo mini mixer.

Begin by connecting the soundbar to the receiver, then to the mini-mixer. From the mini-mixer, you can then connect the subwoofer to the receiver.

Why Add A Subwoofer To A Soundbar?

Generally, there are a variety of soundbar packages including those with only built-in speakers, those with external speakers, those with built-in subwoofers, and those with an external subwoofer.

Also, some soundbars are pretty basic, while others can produce really great sound without external speakers. While it all depends on your needs, adding a subwoofer to your soundbar brings a better listening experience. If you are weighing the pros and cons of adding a sub, look at the summary below.

The Gap A Soundbar Fills

The subwoofer plays the role of reproducing low-pitched audio frequencies, something other speakers cannot.

Subwoofers Are Important For Soundbars

Most soundbars provide the front-heavy sound. This makes the sense as they are in front of the room. Besides, they are not equipped with very powerful bass. In order to get a more robust bass, a subwoofer is a crucial addition. By placing your soundbar and the added subwoofer at the right place, you can bring a more immersive surround sound experience to your TV room.

Samsung Sound Bar Subwoofer Won’t Link

If your Samsung subwoofer and soundbar won’t link, you can troubleshoot them by following the steps below:

  1. Using a small object, press the ID Set button on the back of the subwoofer,
  2. Press and hold the Mute button on the soundbar until it displays “ID Set,”
  3. Continue to link the soundbar to the subwoofer as we have described above.

Also, ensure the devices are powered and placed closer to each other. If this procedure does not help, you may require service for the unit.

Samsung Subwoofer Keeps Disconnecting From Soundbar

If you are facing this problem with your connection, unplug the subwoofer and soundbar for at least five minutes and reconnect again. Ensure the devices are placed closer to each other before attempting to reconnect them as wireless interference may also be the culprit in the disconnection.

How To Turn On Samsung Soundbar Without Remote

You can easily turn on your Samsung soundbar without a remote. You will however need to connect the soundbar to the Samsung TV by an optical cable. This allows Auto Power Link to turn on your soundbar automatically when the TV is turned on. This way, you will never require to use a soundbar remote.

How To Sync Samsung Subwoofer To Soundbar Without Remote

As we already mentioned, this process can be tricky as most soundbars connect with native, manufacturer-paired subwoofers. Many manufacturers, however, give you the option of upgrading your soundbar with more subwoofers with recommended products, though.

For example, if you buy a Samsung soundbar, you should purchase a Samsung-compatible subwoofer to synchronize them successfully. Many soundbars are currently packaged with a subwoofer or extra speakers to create a better surround sound experience.

Apart from the conventional methods of connecting manufacturer-paired soundbars and subwoofers, they’re a jerry-rigged method you can seamlessly use to sync a subwoofer to a soundbar. For this method, you need a receiver and a stereo mini mixer.

Begin by connecting the soundbar to the receiver, then to the mini-mixer. From the mini-mixer, you can then connect the subwoofer to the receiver.

How Do I Turn The Subwoofer Up On My Samsung Soundbar?

The subwoofer is responsible for low-frequency sounds. It augments sound from the front/right speakers. To turn up your subwoofer bass level, there are two approaches applied:

Model Type 1

  1. Press the S/W LEVEL button on the soundbar remote. SW 00 will appear on the front display of the soundbar.
  2. Press + button above the S/W level button on the soundbar remote to increase the S/W volume. You can set it from SW +01 to SW +06. The higher the number, the louder the bass.
  3. Press the S/W – button to decrease the S/W volume.
  4. Play some music or an action-packed to test.

Model Type 2

  1. Press the woofer button on the soundbar remote. SW 0 appears on the front display of the soundbar
  2. Press the skip forward button above the Audio sync button on the soundbar remote to increase the subwoofer volume. It can be from SW+1 to SW +6; the higher the number, the louder the bass
  3. Press the Sound Effect button to decrease the subwoofer volume
  4. Play some music or an action movie to test.

Samsung Sound Bar Subwoofer Won’t Link

If your Samsung subwoofer and soundbar won’t link, you can troubleshoot them by following the steps below:

  1. Using a small object, press the ID Set button on the back of the subwoofer,
  2. Press and hold the Mute button on the soundbar until it displays “ID Set,”
  3. Continue to link the soundbar to the subwoofer as we have described above.

Also, ensure the devices are powered and placed closer to each other. If this procedure does not help, you may require service for the unit.

Samsung Subwoofer Keeps Disconnecting From Soundbar

If you face this problem with your connection, unplug the subwoofer and soundbar for at least five minutes and reconnect again. Ensure the devices are placed closer to each other before reconnecting them, as wireless interference may also be the culprit in the disconnection.

For more detailed instructions, check out our article on how to fix the issue with your subwoofer keeps disconnecting from your soundbar.

How To Turn On Samsung Soundbar Without Remote

You can quickly turn on your Samsung soundbar without a remote. You will, however, need to connect the soundbar to the Samsung TV by an optical cable. This allows Auto Power Link to turn on your soundbar automatically when the TV is turned on. This way, you will never require to use a soundbar remote.

To learn more, check out our article on how to connect your Samsung soundbar to a subwoofer without a remote.

Samsung Ht Ws 1 Connect Subwoofer Without Remote

Usually, the linking ID of the subwoofer is preset at the factory, and the central unit and the sub should link automatically when powered on. However, if the link ID fails to light when you power both the sub and central unit, please reset the ID by following the steps outlined in the manual connection above.

Samsung Subwoofer Blue Light Is On But There Is No Sound

The problem could majorly be with the remote. Take out the batteries from the remote. Tap and hold “volume up” for about 2 minutes on the sub. Put the batteries back on the remote and check if the problem is fixed.

How To Turn On Samsung Soundbar Without Remote

The process is straightforward. However, you will need to connect the Soundbar to the Samsung TV using an optical cable before you can do that.

this connection is made, the Auto Power Link automatically turns on the Samsung Soundbar when you turn on the TV. With this hack, you will never need to use a soundbar remote.

How To Adjust Bass On Samsung Soundbar Without Remote

To adjust bass or perform any other controls on your Samsung soundbar without a remote, you must have the Samsung soundbar app.

Download and install the app to your phone and use it to connect the Soundbar to a subwoofer. Once you complete the connection, you can access the bass control on the app, and you can use it to adjust the bass on the Soundbar.

Samsung Wireless Subwoofer Hack

You can perform countless hacks on a wireless subwoofer, including Bluetooth hack and gain hack.

If you need a gain hack, turn up the volume on the subwoofer. This will give you a more powerful bass. You can also turn down the gain on the subwoofer and turn the subwoofer level up on the AVR, producing a smooth and better sound on the output.

Samsung Wireless Subwoofer Without Soundbar

If you are wondering whether you can use your wireless subwoofer without Soundbar or not, the answer is yes.

However, the subwoofer will need to be connected to a receiver or amplifier. In addition, you will need speaker wires to connect the subwoofer to your speakers.

Samsung Subwoofer Blue Light On But No Sound

This scenario could result from a few errors, including obstacles on the way that are blocking the Soundbar from the receiver. This could be a wall standing between the two devices and blocking the signal.

On the other hand, interference can also cause your subwoofer not to produce sound despite the blue light showing. For instance, this can be caused by a nearby device that uses the same WI-Fi source.

If that is not the case, check that the firmware is updated. Turn off the subwoofer and remote press and hold the Sound button once through your Soundbar. Press it again, this time holding it down for 20 to 30 seconds. A series of numbers will appear.

The numbers that appear after the letter “B” represent the version of firmware used. Run a firmware update through a USB connection or SmartThings app where necessary to resolve the sound error.

How To Connect A Subwoofer To A Soundbar

If you have a wireless subwoofer and Soundbar, Switch on the Bluetooth on the Soundbar. Complete the connection process with Bluetooth.

On the other hand, if one of the devices is not Bluetooth enabled, you can connect them using a cable.

Locate the subwoofer out jack on the Soundbar and then locate the input on the subwoofer, usually on the rear of the unit. Plug one end of the cable to the subwoofer out of the Soundbar and the other end into the input jack of the subwoofer.

Domande frequenti

1. Do soundbars Need A Remote?

Nearly all home theater gadgets come with remote control. However, soundbars are an exception as some models do not include a remote.

2. Can I Use Samsung Soundbar Without Remote?

Generally, Samsung soundbars and Subwoofers will automatically connect without requiring the use of a remote. Both the devices utilize built-in intelligent ID sets that enable them to link instantaneously.

3. Can I Control My Bluetooth Soundbar With My Phone?

Sì. Using the Samsung Audio Remote app, you can select and use the different input sources, select songs and perform a few controls. You can download the app from Google Play Store.

4. How Do You Hook Up A Soundbar Without A Remote?

You will need to download the Samsung soundbar app to your phone before you can connect the Soundbar to the subwoofer without a remote. Once the Soundbar is linked to the subwoofer, pair it with your phone, followed by the subwoofer by holding the ID set button for several seconds.

Check out how to connect a Samsung soundbar to a TV without a remote and how to connect a Vizio soundbar to a TV without a remote.


  1. Come collegare un subwoofer per un computer portatile
  2. Come imparare un telecomando Samsung
  3. Come collegare un Samsung Soundbar
  4. Come collegare altoparlanti remoti
  5. Come collegare un subwoofer amplificato
  6. Come collegare il tuo Yamaha Subwoofer